Aluminium profiles slot 8
Slot 8 is the most widely used series in machine and fixture construction — listed by us as the A8 series. 40 mm grid, M8 core thread and the largest choice of T-slot nuts, connectors and accessories.
We cut all profiles to your dimensions. For constructions where weight matters, many cross-sections are also available in a “light” version.
Aluminium profiles slot 8 at a glance (31)
Matching connectors & accessories in the catalogue →
Profile A8 120x40
Profile A8 120x40 light
Profile A8 120x80
Profile A8 120x80 light
Profile A8 160x28
Profile A8 160x40
Profile A8 160x40 light
Profile A8 160x80
Profile A8 160x16
Profile A8 160x80 light
Profile A8 40x16
Profile A8 40x16 eco
Profile A8 40x40
Profile A8 40x40 eco
Profile A8 40x40 light
Profile A8 40x40 light - 1 slot
Profile A8 40x40 light - 2 slots 180°
Profile A8 40x40 light - 2 slots 90°
Profile A8 40x40 light - 3 slots
Profile A8 40x40 light - 45°
Profile A8 80x16
Profile A8 80x40
Profile A8 80x40 eco
Profile A8 80x40 light
Profile A8 80x40 light - 2 slots
Profile A8 80x80
Profile A8 80x80 eco
Profile A8 80x80 light
Profile A8 80x80 light - 2 slots
Profile A8 80x80 light - 45°
Profile A8 80x80 light - 4 slots 90°
Aluminium profile 40x40 slot 8 — the classic
The 40 × 40 profile is the standard for frames, racks and workstations: stiff enough for most structures and easy to extend with slots on all four sides. For higher loads or long free spans, choose 80 × 40, 80 × 80 or the large cross-sections up to 160 × 80.
Matching parts
- A8 T-slot nuts from M4 to M8 — with web, heavy-duty or stainless
- Angle bracket sets, screw-in and automatic connectors for right-angled frames
- Caps for clean profile ends
- Levelling feet, base plates and castors for frames and mobile workstations
Frequently asked questions
Which T-slot nuts fit aluminium profiles with slot 8?+
All T-slot nuts of the A8 series — available from us in M4, M5, M6 and M8, with web, heavy-duty or stainless. Parts of the A5 and A6 series do not fit.
When should I use the light version?+
The “light” version is weight-optimised. It is suitable when the construction does not need the full stiffness of the standard version — for example for panelling, frames with short spans or mobile structures.
In which lengths can I get the profiles?+
We cut any length between 100 and 6,000 mm with 0.1 mm accuracy. Alternatively, we deliver full 3 m or 6 m bars. Mitre cuts, holes and threads can be requested via the profile configurator.
How much do the aluminium profiles cost?+
Add the profiles you need to the cart with cut length and quantity, then send the request. You will receive a non-binding quotation with prices for exactly your lengths.